Strata CIX DP5000-series Telephone UG 11/07 93
Administrator Programming 7
This appendix contains some of the functions that can be performed using
Administrator Mode.
Important!
• These functions require Strata CIX 5.1 or higher system software.
• To access the Admin mode, the telephone must be enabled for these functions in
system programming using eManager. Refer to “Strata CIX Programming Manual,
Vol um e 1” for eManager programming.

Functions

Use the Soft Keys on the telephone to program the following functions in
Administrator mode:
• Phone Name – enter the Extension (PDN) name for any telephone in the Strata
CIX
• Door Name – enter door phone name
• System SD/Name1 – system speed dial names
• Station SD/Name1 – station speed dial names for any telephone in the system
• CO Line Name – CO line names
• DNIS Name – DNIS names
• Phone Key Label – button names on the electronic telephone key strips
• LM Key Label – button names on the Add-on module key strip
1 The Admin telephone mode allows speed dial names to be programmed, but the actual speed dial numbers
are programmed using the speed dial programming procedures described in the User Guide.