Toshiba EVR16-X, EVR8-X, EVR32-X, HVR32-X, HVR8-X, HVR16-X Motion Setup, Creating a Motion Area

Models: EVR32-X HVR16-X EVR16-X EVR8-X HVR8-X HVR32-X

1 135
Download 135 pages 56.28 Kb
Page 53
Image 53
MOTION SETUP

35

MOTION SETUP

The DVR allows the user to adjust several different Motion Settings and create motion detection regions.

NOTE: Motion grids configured using the SCS software will be advanced motion grids.

Display full screen video

pop up on motion eventCreating a Motion Area Beep on motion eventManual background

Display full screen video pop up on sensor event

Schedule recording at a regular specified interval

Reduces Analog Signal Noise from Motion Detection

Creating a Motion Area

1.Click the Motion button in Setup.

2.Select a camera from the Select Camera list.

3.Select the Detect Detail Motion Area check box.

4.Click Clear.

5.Click Advanced Motion Area Setup.

6.Click a Motion Detection Area shape button.

7.Drag the mouse over the camera image.

TIP: To create a polygon shape, click the mouse at each point and double-click to close the shape.

8.Click OK.

9.Move the sliders to adjust motion sensitivity and the noise filter.

10.Define the pre-alarm and post-alarm recording time for a motion event.

Pre Alarm – 0 > 50 Seconds [The number of seconds the DVR records before motion is detected]

Post Alarm (MOTION) – 0 > 50 Seconds [The number of seconds the DVR records after motion is detected]

Page 53
Image 53
Toshiba EVR16-X, EVR8-X, EVR32-X, HVR32-X, HVR8-X, HVR16-X user manual Motion Setup, Creating a Motion Area