Toshiba G35-AV660 Viewing the status of a hard disk drive, Date, RAID, Start, TOSHIBA, All Programs, RAID Console, Date of last media, the larger hard disk drive

Using the TOSHIBA RAID Utility	243
TOSHIBA RAID Console Utility

NOTE	When RAID-0 is configured, the total hard disk capacity will
	appear to the operating system as twice that of the smaller of
	the two hard drives in the RAID configuration. For example,
	when a RAID-0 array is configured with one 40 GB hard disk
	and one 60GB hard disk, the computer’s total hard disk will
	appear to the operating system as 80 GB, 40 GB + 40 GB (NOT
	40 GB + 60 GB), since you cannot use the remaining 20 GB on
	the larger hard disk drive.
	When RAID-1 is configured, the computer’s total hard disk
	capacity will appear to the operating system as the smaller of
	the two hard disk drives used. For example, when RAID-1 is
	configured with one 40 GB hard disk drive and one 80 GB hard
	disk drive, the computer’s total hard disk capacity will appear
	as only 40 GB to the operating system.

❖Date of last media check—Date and time when a media check was completed. Displays the most recent date that a media check or array rebuild occurred.

❖Assigned local drive—Local drive letter assigned to the array.Viewing the status of a hard disk driveTo view the status of a hard disk drive:

1Start the TOSHIBA RAID Console utility by clicking Start, All Programs. Then select TOSHIBA, RAID, RAID Console.

2Double-click the hard disk icon.The Hard disk drive information window appears.