SERVICING INSTRUCTIONS

REPLACING PARTS

9

AR1868

Slide the burner to the right and out of its location

Refit in reverse order

When refilling the stone pebbles, fill to the level of the rim of the burner tray and flatten level.

Ensure no stone pebbles fall into the pilot area.

7.maIN CONTROL ASSEMBLY

7.1To access the main control assembly, first remove:

the decorative frame

window frame

enamelled panels

main burner

7.2To remove the access panel:

Undo the two screws, Diagram 10

Note the orientation of the access panel with the return edges facing forward

10

AR1869

7.3Isolate the gas supply at the isolation device and disconnect the gas inlet, Diagram 11.

11

7.4Remove the six screws securing the control assembly, Diagram 12.

12

AR1869

7.5The control panel can now be tilted back to reveal the controls, Diagram 13

13

AR1871

7.6Disconnect the two cables marked ‘A’ in Diagram 14.

14

A

A

C

AR1873

B

Disconnect the battery extension lead, Diagram 14, B

Disconnect the touch pad extension lead, Diagram 14, C

The control assembly can now be lifted up and removed.

Reassemble in reverse order

AR1888

27

Page 27
Image 27
Stovax PR0919 manual MaIN Control Assembly, Ensure no stone pebbles fall into the pilot area