INSTALLATION INSTRUCTIONS
INSTALLATION
•Offer the frame to the foot of the opening
•Slide the frame to the right to locate the right hinge pin
24
AR1865
5.4• Manoeuvre the frame up towards the left side to locate the left hinge pin
•Slide onto the hinge with a right movement
•Secure in place with a spring clip at the right hinge pin,
Diagram 25
25
AR1862
•Close the window
5.5Using the allen key provided:
•Close the window locks by moving from open to shut towards the window centre
26
6. LIGHTING THE STUDIO
Note: The Emergency Shut Off switch must be in the ON
position, refer to Section 2, User Instructions. There are two ways of lighting the Studio:
•by thermostatic remote control
•using the fire’s touch pad
THERMOSTATIC REMOTE CONTROL
27
AR1883
This remote controls the appliance from pilot ignition through to shut down. In ‘MANUAL MODE’ you can:
•light the pilot
•turn on the main burner
•regulate the flame from low to high and back
•turn off the burner leaving just the pilot burning In ‘TEMP MODE’ you can:
•set the room temperature so the stove automatically maintains that temperature
In ‘TIMER MODE’ the stove:
•turns on and off according to the set time periods
•automatically regulates the room temperature during the set periods
TOUCH PAD CONTROL
28
AR1860
AR1885
20
