Onkyo DTR-7.9 Controlling Other Components, Preprogrammed Remote Control Codes, Notes

Controlling Other Components

You can use the AV receiver’s remote controller (RC-718M) to control your other AV components, including those made by other manufacturers. This sec- tion explains how to:

•	Enter the remote control code for a component that
	you want to control: DVD, TV, VCR, etc.
•	Learn commands directly from another component’s

1	Look up the appropriate remote
	control code in the separate
	Remote Control Codes list.
	The codes are organized by category
	(e.g., DVD player, TV, etc.).

remote controller (see page 131).

• Program the Macro buttons to perform a sequence of

up to eight remote control actions (see page 132).

Preprogrammed Remote Control Codes

The following Remote Mode buttons are prepro- grammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.

For details on controlling these components, see the pages indicated.

Integra/Onkyo DVD player (page 125)

Integra/Onkyo CD player (page 128)

Onkyo cassette recorder with u(page 130)

Onkyo RI Dock with u(page 129)

Entering Remote Control Codes

You’ll need to enter a code for each component that you want to control.

2

(3 seconds)

While holding down the Remote Mode button to which you want to enter a code, press and hold down the [Display] button (about 3 seconds).

The Remote Mode button lights up.

Notes:

•Remote control codes cannot be entered for the [Receiver] and [Zone 2] buttons.

•Only TV remote control codes can be entered for the [TV] button.

•Apart from the [Receiver], [TV], and [Zone 2] buttons, remote control codes from any category can be entered for the Remote Mode but- tons. However, these buttons also work as input selector buttons (page 54), so choose a Remote Mode button that corresponds with the input to which you connect your component. For example, if you con- nect your CD player to the CD input, choose the [CD] button when enter- ing its remote control code.

	Display
Remote	Receiver
Mode

Number buttons

3	Within 30 seconds, use the num-
	ber buttons to enter the 5-digit
	remote control code.

The Remote Mode button flashes twice.

If the remote control code is not entered successfully, the Remote Mode button will flash once slowly.

Note:

The remote control codes provided are correct at the time of printing, but are subject to change.

122