Onkyo DTR-7.9 3 4 5, First Time Setup—Continued, Place the speaker setup micro, Setup Mic jack

First Time Setup—Continued

2	Place the speaker setup micro-
	phone at measurement point 1
	(page 49), and connect it to the
	Setup Mic jack.
	Auto Speaker Setup
	Please place microphone at center of listening
	area at ear height.
	Push Enter : Next

Notes:

•Before starting Audyssey MultEQ® Automatic Speaker Setup, arrange the room and connect the speakers as you would for enjoying movies. Changes to the room after auto setup requires you run the auto setup again, as room EQ characteristics may have changed.

•When starting the automatic speaker setup, do not stand between the speakers and microphone, and avoid obstacles blocking the path between speakers and microphone. This will produce inaccurate results.

•Position the microphone at ear height of a seated listener with the micro- phone tip pointed directly at the ceil- ing using a tripod. Do not hold the microphone in your hand during measurements as this will produce innacurate results.

•Make the room as quiet as possible. Background noise can disrupt the room measurements. Close win- dows, silence cell phones, televi- sions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices.

•Cell phones should be turned off or placed away from all audio electron- ics during the measurement process as Radio Frequency Interference (RFI) may cause measurement dis- ruptions (even if the cell phone is not in use).

3

4

5

Press [Enter].

The automatic speaker setup starts.

Auto Speaker Setup

Do not unplug Setup Mic.

Please keep quiet.

Now measuring. . .

Test tones are played through each speaker as Audyssey MultEQ Auto- matic Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone.

The following screen appears.

Auto Speaker Setup

Please place microphone at

2nd Position at ear height.

Push Enter : Next

Place the setup microphone at the next position (page 49), and then press [Enter].

Audyssey MultEQ performs more measurements. This takes a few min- utes.

Auto Speaker Setup

Do not unplug Setup Mic.

Please keep quiet.

Now measuring. . .

When prompted, place the setup microphone at the next position, and repeat step 4.

50