Onkyo DTR-7.9 Video Input Setup, HDMI Input Setup, The “HDMI Input” menu appears, Notes

First Time Setup—Continued

Video Input Setup

HDMI Input Setup

If you connect a video component to HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, you can set the AV receiver so that com- posite video, S-Video, and component video sources are upconverted* and output by the HDMI OUT. You can set this for each input selector by selecting the “- - - - -” option.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “1. Input Assign”, and then press [Enter].

The “Input Assign” menu appears.

1. Input Assign

1. HDMI Input

2.Component Video Input

3.Digital Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “1. HDMI Input”,
	and then press [Enter].
	The “HDMI Input” menu appears.
	1–1.	HDMI Input
	DVD	HDMI1
	VCR/DVR	HDMI2
	CBL/SAT	HDMI3
	GAME/TV	HDMI4
	AUX	- - - - -
	TAPE	- - - - -
	TUNER	- - - - -
	CD	- - - - -
	PHONO	- - - - -
4	Use the Up and Down [q]/[w] but-
	tons to select an input selector,

and use the Left and Right [e]/ [r] buttons to select:

HDMI1, HDMI2, HDMI3, HDMI4,

HDMI5:

Select the HDMI IN to which the video component has been connected.

-- - - -:Output composite video,

S-Video, and component video sources from the HDMI OUT. The video output signal from the HDMI OUT is the one configured in “Compo- nent Video Setup” (see page 43).

Each HDMI IN cannot be assigned to more than one input selector. When HDMI1 - HDMI5 have already been assigned, you must set first any unused input selectors to “- - - - -” or you will be unable to assign HDMI1 - HDMI5 to input selector.

5	Press the [Setup] button.
	The setup menu closes.

Notes:

•For composite video, S-Video, and component video upconversion for the HDMI OUT, the “Monitor Out” setting must be set to “HDMI” (see page 40), and the HDMI Input setting must be set to “- - - - -”. See page 22 for more information on video signal flow and upconversion.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 44.

•The TUNER input selector cannot be assigned and is fixed at the “- - - - -” option.

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

42