Onkyo DTR-7.9 instruction manual Buttons to select a category, Press the Enter button repeat

Listening to the Radio—Continued

■ Category Search Mode

1	Press the [Tuner] button, and
Remote	then press the [Enter] button
	repeatedly to select Category
controller
	Search mode.

	This procedure can also be performed
	on the AV receiver by using its [Tuner]
	button, and [Tuning Mode] button.
2	Use the Left and Right [e]/[r]
	buttons to select a category, and

use the Up and Down [q]/[w] but- tons to select a channel in that category.

Tuning

Tuning Mode Preset

Memory Enter

Return

■Direct Tuning

You can select a SIRIUS Satellite Radio channel directly by entering its number.

1	Press the [Tuner] button, fol-
	lowed by the [D.TUN] button.
	Remote
	controller

2	Within 8 seconds, use the num-
	ber buttons to enter the channel
	number.
	For example, to select channel #20,
	press 0, 2, 0, or 2, 0, [Enter].
	Note:
	While the [Tuner] button is flashing,
	you cannot select another input source

CH + / –

Enter

Return

Selecting Channels on the AV receiver:

1		Press the [Tuning Mode] button
	AV receiver	repeatedly to select Channel
		Search mode or Category Search
		mode.
2		Press the [Enter] button repeat-
	AV receiver	edly to select a category.

with the remote controller.

Notes:

•If you select an unavailable channel, “INVALID CHANNEL” appears on the display.

•If you select a channel that you are not subscribed to, “CALL SIRIUS” appears on the display.

•Channels that are locked must be unlocked before you can listen to them. See “Parental Lock” on page 71 for more information.

3

AV receiver

Use the Tuning Up and Down [q]/ [w] buttons to select a channel.

In Channel Search mode, you can select any channel.

In Category Search mode, you can only select channels from the currently selected category.

69