Onkyo DTR-7.9 instruction manual Speaker Distance, Repeat for all speakers

Advanced Setup—Continued

Speaker Distance 4

This setting is set automatically by the Automatic

Speaker Setup function (see page 49).

Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener’s ears as the sound designer intended.

2

5

3-7 3, 4 2, 8

1	Measure and make a note of the
	distance from each speaker to	6
	the listening position.

2	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

Use the Up and Down [q]/[w] but- tons to select “3. Speaker Dis- tance”, and then press [Enter].

The “Speaker Distance” menu appears.

2–3.	Speaker Distance
Unit	feet
Left	12.0ft
Center	12.0ft
Right	12.0ft
Surr Right	7.0ft
Surr Back R	7.0ft
Surr Back L	7.0ft
Surr Left	7.0ft
Subwoofer	12.0ft

Use the Up and Down [q]/[w] but- tons to select “Unit”, and then use the Left and Right [e]/[r] buttons to select:

feet: Select if you want to enter dis- tances in feet. Can be set from

0.2to 30 feet in 0.2-feet steps.

meters: Select if you want to enter distances in meters. Can be set from 0.06 to 9 meters in 0.06-meter steps.

Use the Up and Down [q]/[w] but- tons to select “Left”, and then use the Left and Right [e]/[r] buttons to specify the distance.

Specify the distance from the front left speaker to your listening position.

3 Use the Up and Down [q]/[w] but- tons to select “2. Speaker Setup”, and then press [Enter]. The “Speaker Setup” menu appears.

2. Speaker Setup

1. Speaker Settings

2.Speaker Configuration

3.Speaker Distance

4.Level Calibration

5.Equalizer Settings

6.THX Audio Setup

7	Repeat step 6 for all speakers.
	Note:
	Speakers that you set to “No” or
	“None” on the Speaker Configuration
	page (page 90) cannot be selected.
8	Press the [Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

93