Onkyo DTR-7.9 Audio Adjust Functions, Multiplex/Mono Settings, PLIIx/Neo 6 Music Mode Settings

Advanced Setup—Continued

Audio Adjust Functions

Here you can set listening mode-related settings and functions.

1	Press the [Receiver] button fol-
Remote	lowed by the [Setup] button.
	The main menu appears onscreen.
controller
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “3. Audio Adjust”, and then press [Enter].

The “Audio Adjust” menu appears.

3. Audio Adjust

1. Multiplex / Mono

2.PLIIx / Neo:6

3.Dolby EX

4.Theater-Dimentional

5.DSD

6.LFE Level

3 Use the Up and Down [q]/[w] but- tons to select the functions, and then press [Enter].

The function menu you selected appears.

4 Use the Up and Down [q]/[w] but- tons to select the settings, and use the Left and Right [e]/[r] buttons to set them.

The settings are explained below.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

Multiplex/Mono Settings

■Multiplex

Input Ch

This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are output.

■Mono

Input Ch

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

Left + Right: Both the left and right channels are out- put (default).

Left: Only the left channel is output. Right: Only the right channel is output.

Output Speaker

This setting determines which speakers output mono audio when the Mono listening mode is selected.

Left / Right: Mono audio is output by the front left and right speakers.

Center: Mono audio is output by the center speaker (default).

PLIIx/Neo:6 Music Mode Settings

■PLIIx Music (2ch Input)

These settings provide for playing any 2-channel digital source such as Dolby Digital, or 2-channel analog/PCM source in the Dolby PLIIx Music listening mode.

Panorama

With this function, you can broaden the width of the front stereo image when using the Dolby Pro Logic II Music or Dolby Pro Logic IIx Music listening mode.

On: Panorama function on.

Off: Panorama function off (default).

98