Onkyo DTR-7.9 instruction manual 102, Assigning Listening Modes to Input, Sources

Advanced Setup—Continued

Assigning Listening Modes to Input				4	Use the Up and Down [q]/[w] but-
Sources					tons to select the signal format
You can assign a default listening mode to each input					that you want to set, and then use
					the Left and Right [e]/[r] but-
source that will be selected automatically when you
select each input source. For example, you can set the					tons to select a listening mode.
					Only listening modes that can be used
default listening mode to be used with Dolby Digital
					with each input signal format can be
input signals. You can select other listening modes dur-
					selected (see page 80).
ing playback, but the mode specified here will be
					The Last Valid option means that the
resumed once the AV receiver has been set to Standby.
					listening mode selected last will be
1	Press the [Receiver] button fol-				used.
					Analog / PCM: With this setting, you
	lowed by the [Setup] button.
Remote					can specify the listening mode to be
	The main menu appears onscreen.
controller					used when an analog (CD, TV, LD,
	If the main menu doesn’t appear, make				VHS, MD, turntable, radio, cassette,
	sure the appropriate external input is				cable, satellite, etc.) or PCM digital
	selected on your TV.				(CD, DVD, etc.) audio signal is played.
					Dolby Digital: With this setting, you
					can specify the listening mode to be
					used when a Dolby Digital or Dolby
					Digital Plus format digital audio signal
					is played (DVD, etc.).
2	Use the Up and Down [q]/[w] but-				DTS: With this setting, you can specify
					the listening mode to be used when a
	tons to select “5. Listening Mode				DTS or DTS-HD High Resolution for-
	Preset”, and then press [Enter].
					mat digital audio signal is played
	The “Listening Mode Preset” menu
					(DVD, LD, CD, etc.).
	appears.
					D.F. 2ch: With this setting, you can
		5. Listening Mode Preset			specify the listening mode to be used
					when a 2-channel (2/0) digital audio
	1.	DVD
	2.	VCR/DVR			signal (Dolby Digital, DTS) is played
	3.	CBL/SAT
	4.	GAME/TV			(DVD, etc.).
	5.	AUX
	6.	TAPE			D.F. Mono: With this setting, you can
	7.	TUNER
	8.	CD			specify the listening mode to be used
	9.	PHONO
					when a mono digital audio signal is
					played (DVD, etc.).
3	Use the Up and Down [q]/[w] but-				Multich PCM: Specifies the default
					listening mode for multichannel PCM
	tons to select the input source				sources input via a HDMI IN, such as
	that you want to set, and then				DVD-Audio.
	press [Enter].				192k/176.4k: Specifies the default lis-
	The signal format selection menu
					tening mode for high resolution
	appears.				176.4 kHz and 192 kHz digital audio
					sources such as DVD-Audio.
		5–1.	Listening Mode Preset		Dolby TrueHD: Specifies the default
	DVD
	Analog / PCM		All Ch Stereo		listening mode for Dolby TrueHD
	Dolby Digital		PLIIx Movie
					sources, such as Blu-ray or HD DVD
	DTS		Neo:6
	D.F. 2ch		PLIIx Movie
	D.F. Mono		Full Mono		(input via HDMI).
					DTS-HD Master Audio: Specifies the
					default listening mode for DTS-HD
					Master Audio sources, such as Blu-ray
	For TUNER input selector only “Ana-				or HD DVD (input via HDMI).
	log” will be available.				DSD: Specifies the default listening
					mode for DSD multichannel sources,
					such as SACD.

102