Onkyo DTR-7.9 instruction manual 118, Using Zone, Controlling Zone 2 from the AV receiver

Zone 2—Continued

Using Zone 2

This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.

Controlling Zone 2 from the AV receiver

1 2

1

1	To turn on Zone 2 and select an
	input source, press the [Zone 2]
	button repeatedly.
	Alternatively, press the [Zone 2]
	button followed by an input
	selector button within 8 seconds.
	Zone 2 turns on, the Zone 2 indicator
	lights up.
	To select AM or FM press the [Tuner]
	input selector button repeatedly. On the
	North American model, you can also
	select XM or SIRIUS.
	To select the same source as that of the
	main room, press the [Zone 2] button
	repeatedly until “Z2 Selector: Source”
	appears on the display.
	Note:
	You cannot select different AM or FM
	radio stations for your main room and
	Zone 2. The same AM/FM radio station
	will be heard in each room.
2	To turn off Zone 2, press the [Off]
	button.

Note:

While Powered Zone 2 is being used, listening modes that require surround back speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema, are unavailable.

Controlling Zone 2 with the Remote Controller

On/Standby Zone2

Input

Selector

Note:

To control Zone 2, you must press the remote control- ler’s [Zone 2] button first.

1	Press the [Zone 2] button, then
	point the remote controller at the
	AV receiver and press the [On/
	Standby] button.
	Zone 2 turns on, the Zone 2 indicator
	lights up.

2	To select an input source for
	Zone 2, press the [Zone 2] but-
	ton, followed by an Input Selector
	button.
	To select AM or FM press the [Tuner]
	Input Selector button repeatedly. On the
	North American model, you can also
	select XM or SIRIUS.
	Note:
	You cannot select different AM or FM
	radio stations for your main room and
	Zone 2. The same AM/FM radio station
	will be heard in each room.
3	To turn off Zone 2, press the
	[Zone 2] button, followed by the
	[On/Standby] button.

118