Onkyo DTR-7.9 First Time Setup, 1 2-42, 31, Monitor Setup, play, Press the Setup button

First Time Setup

This section explains the settings that you need to make before using the AV receiver for the very first time.

Monitor Setup

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI OUT, as well as whether to have the onscreen setup menu output through the HDMI OUT or through an analog output.

1

2-4 2, 3 1, 5

If you connect your TV to the COMPONENT VIDEO MONITOR OUT or COMPONENT VIDEO ZONE 2 OUT, set the “Monitor Out” setting to “Analog” so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output by the COMPONENT VIDEO MONITOR OUT and

COMPONENT VIDEO ZONE 2 OUT.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

If you connect your TV to the HDMI OUT, set the “Monitor Out” setting to “HDMI” so that the onscreen setup menus are displayed and composite video, S- Video, and component video sources are upconverted* and output by the HDMI OUT. The onscreen setup menus are displayed on the HDMI OUT only.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

You can specify the output resolution for the HDMI OUT and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV (see page 109). See page 22 for charts showing how the Monitor Out and Resolution settings affect the video sig- nal flow through the AV receiver.

1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The submenu item appears on the dis-
	play.

2	Use the Up and Down [q]/[w] but-
	tons to select “7. Hardware

Setup”, and then press [Enter].

3	Use the Up and Down [q]/[w] but-
	tons to select “5. HDMI”, and

then press [Enter].

4 Use the Up and Down [q]/[w] but- tons to select “Monitor Out”, and then use the Left and Right [e]/ [r] buttons to select:

Analog: Select this if your TV is con- nected to the COMPONENT VIDEO MONITOR OUT, COMPONENT VIDEO ZONE 2 OUT, S MONITOR OUT, or V MONITOR OUT.

HDMI: Select this if your TV is con- nected to the HDMI OUT.

Note:

When “HDMI” is selected, the onscreen setup menus are output by only the HDMI OUT.

5 Press the [Setup] button.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

40