Onkyo DTR-7.9 Name Edit, To correct a character, Advanced Setup—Continued, A/V Sync, Notes

Advanced Setup—Continued

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 250 milliseconds (msec) in 2 millisecond steps.

Use the Left and Right [e]/[r] buttons to set the delay. To view the TV picture while setting the delay, press [Enter].

To return to the previous screen, press the [Return] but- ton.

4–2. A/V Sync

DVD

A/V Sync 0msec

Press Enter to see picture.

If HDMI Lip Sync is enabled (see page 110), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parenthe- ses.

Note:

A/V Sync is disabled when the Direct listening mode is used with an analog input source.

Name Edit

You can enter a custom name for each individual input selector and radio preset for easy identification. When entered, the custom name will appear on the display.

The custom name is edited using the character input screen.

1.Use the arrow [q]/[w]/[e]/[r] buttons to select a character, and then press [Enter].

Repeat this step to enter up to 10 characters.

2.When you’ve finished, to store a name, be sure to use the arrow [q]/[w]/[e]/[r] buttons to select “OK”, and then press [Enter]. Otherwise it will not be saved.

Name input area

	4-3. Name Edit
	Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e		f g h			i	j	k	l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 –								.	'
(	)	/	,	:	;	!	?	_
					OK			CANCEL

(Left)/ (Right):

Selected when the cursor is moved within the Name input area.

OK:

Selects when the entry is com- plete.

CANCEL:

Selects when you want to cancel the name entry.

To correct a character:

1.Use the arrow [q]/[w]/[e]/[r] buttons to select “”(Left) or “”(Right) and then press [Enter].

2.Press [Enter] several times to select the incorrect character (The cursor moves one letter each time [Enter] is pressed).

3.Use the arrow [q]/[w]/[e]/[r] buttons to select the correct character, and then press [Enter].

Notes:

•To name a radio preset, use the [Tuner] button to select AM or FM, and then select the preset (see step 1 on page 103).

•You cannot enter a custom name for XM or SIRIUS radio presets.

•To restore a custom name to the default, erase the cus- tom name by entering an empty white space for each letter.

•This procedure can also be performed on the AV receiver by using its [Setup], [Enter], and arrow but- tons.

104