Specifications, Amplifier Section, Video Section, General

Specifications

Rated Output Power
All channels:
	North American:
	130 watts minimum continuous
	power per channel, 8 ohm loads, 2
	channels driven from 20 Hz to 20
	kHz, with a maximum total
	harmonic distortion of 0.08% (FTC)
	145 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.7% (FTC)
	160 watts minimum continuous power
	per channel, 6 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.1% (FTC)
	Australian:
	7 ch ⋅180 W at 6 ohms, 1 kHz, 1 ch
	driven (IEC)
Maximum Output Power	7 ch ⋅ 230 W at 6 ohms, 1 kHz, 1 ch
	7 ch ⋅ 230 W at 6 ohms, 1 kHz, 1 ch
	driven (JEITA)
Dynamic Power	300 W (3 Ω, Front)
	250 W (4 Ω, Front)
	150 W (8 Ω, Front)
THD (Total Harmonic Distortion)
	0.08% (Power Rated)
Damping Factor	60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance
	200 mV/47 kΩ (LINE)
	2.5 mV/47 kΩ, (PHONO MM)
Phono Overload	70 mV (MM 1 kHz, 0.5%)
Output Level and Impedance
	200 mV/470 Ω (REC OUT)
Frequency Response	5 Hz - 100 kHz/+1 dB - 3 dB (Direct
	mode)
Tone Control	±10 dB, 50 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio	110 dB (LINE, IHF-A)
	80 dB (PHONO, IHF-A)
Speaker Impedance	4 Ω - 16 Ω

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 Ω (Component and S-Video Y)

0.7Vp-p/75 Ω (Component PB/CB, PR/CR)

0.28Vp-p/75 Ω (S-Video C) 1 Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 50 MHz - 3 dB

FM Tuning Frequency Range

Digital Tuner (North American models only):

XM, SIRIUS

■Video Inputs

■Video Outputs

■Audio Inputs

■Audio Outputs

■Control Terminal

Specifications and features are subject to change without notice.

133