Onkyo DTR-7.9 instruction manual 109, Analog Multich

Advanced Setup—Continued

■SIRIUS Parental Lock

(on North American model)

This item is for use with SIRIUS Satellite Radio. It’s not available if “SAT Radio Mode” is set to “None”. See “Parental Lock” on page 71 for more information.

Analog Multich

■Subwoofer Input Sensitivity

Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal. With this setting, you can change the AV receiver’s sub- woofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the AV receiver’s DVD SUBWOOFER jack.

You can select 0 dB, 5 dB, 10 dB, or 15 dB.

If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting.

HDMI

■Monitor Out

See “Monitor Setup” on page 40.

■Output Resolution

You can specify the output resolution for the HDMI out- puts and have the AV receiver upconvert the picture res- olution as necessary to match the resolution supported by your TV.

See the “Video Resolution Chart” on page 139 to see how the AV receiver handles video input at different resolutions.

Through: Select this to pass video through the AV receiver at the same resolution and with no conversion (default).

Auto: Select this to have the AV receiver automat- ically convert video at resolutions not sup- ported by your TV.

(Not available when the “Monitor Out” set- ting is set to “Analog”.)

480p (480/576p):

Select this for 480p or 576p output and video conversion as necessary.

720p: Select this for 720p output and video con- version as necessary.

1080i: Select this for 1080i output and video con- version as necessary.

1080p: Select this for 1080p output and video con- version as necessary.

(Not available when the “Monitor Out” setting is set to “Analog”.)

Note:

For optimal video performance, THX recommends that the “Output Resolution” be set to “Through”.

■Zoom Mode

This setting determines the aspect ratio.

Auto: The AV receiver automatically selects the Zoom Mode in accordance with the input signal (default).

Normal:

Full:

Zoom:

Wide Zoom:

109