Onkyo DTR-7.9 TV Format Setup not North American models, The “OSD Setup” menu appears

First Time Setup—Continued

TV Format Setup

(not North American models)

For the onscreen setup menus to display properly, you must specify the TV system used in your area.

1	Press the [Receiver] button fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “6. Miscella- neous”, and then press [Enter]. The “Miscellaneous” menu appears.

6. Miscellaneous

1. Volume Setup

2.OSD Setup

3.12V Trigger A Setup

4.12V Trigger B Setup

5.12V Trigger C Setup

3	Use the Up and Down [q]/[w] but-
	tons to select “2. OSD Setup”,
	and then press [Enter].
	The “OSD Setup” menu appears.
	6–2. OSD Setup
	Immediate Display	On
	Monitor Type	16 : 9
	Display Position	Bottom
	TV Format	Auto
	Language	English

4 Use the Up and Down [q]/[w] but- tons to select “TV Format”, and then use the Left and Right [e]/ [r] buttons to select:

Auto: Select this to automatically detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC.

PAL: Select if the TV system in your area is PAL.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

46