Onkyo DTR-7.9 Hardware Setup, Zone, Tuner, Changing the Remote Controller’s ID

Advanced Setup—Continued

. Hardware Setup

This section explains items on the “Hardware Setup” menu.

1	Press the [Receiver] button fol-
Remote	lowed by the [Setup] button.
	The main menu appears onscreen.
controller
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [Enter]. The “Hardware Setup” menu appears.

7. Hardware Setup

1. Remote Control

2.Zone2

3.Tuner

4.Analog Multich

5.HDMI

6.Network

3 Use the Up and Down [q]/[w] but- tons to select an item, and then press [Enter].

The screen for that item appears.

4 Use the Up and Down [q]/[w] but- tons to select an item, and use the Left and Right [e]/[r] but- tons to change it.

The items are explained below.

5	When you’ve finished, press the
	[Setup] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

Remote Control

■Remote ID

When several Integra/Onkyo components are used in the same room, their remote ID codes may overlap. To differ- entiate the AV receiver from the other components, you can change its remote ID from 1, the default, to 2 or 3.

Note:

If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the Remote Controller’s ID

1 Remote	While holding down the
	[Receiver] button, press and hold
controller
	down the [Setup] button until the
	[Receiver] button lights up
	(about 3 seconds).

(3 seconds)

2	Use the number buttons to enter
	ID 1, 2, or 3.
	The [Receiver] button flashes twice.

Zone 2

See “Zone 2” on page 114.

Tuner

■AM Frequency Step (not North American

models)

See “AM Frequency Step Setup

(not North American models)” on page 47.

■SAT Radio Mode (on North American model)

If you connect an XM Satellite Radio antenna or SIRIUS Satellite Radio antenna to the AV receiver (both sold separately), set this setting to “XM” or “SIRIUS” respectively. If you connect both types of antenna, select

“XM/SIRIUS”. Otherwise, select “None”. See “Listen- ing to XM Satellite Radio® (North American Model

Only)” on page 59 and see “Listening to SIRIUS Satel- lite Radio® (North American Models Only)” on page 66 for more information.

■Antenna Aiming (on North American model)

The ID of the Sirius Connect Home Tuner is displayed here. You must sign up to obtain a SIRIUS ID. See “Positioning the SiriusConnect Home antenna” on page 74 for more information.

See “Positioning the XM Mini-Tuner System” on page 64 for information about the XM Mini-Tuner Antenna.

108