Onkyo DTR-7.9 Component Video Setup, Tons to select 2. Component, Video Input, and then press

First Time Setup—Continued

Component Video Setup

If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 2, you should assign it to the DVD input selector.

If you want to output composite and S-Video sources from the COMPONENT VIDEO MONITOR OUT, select “- - - - -”, as explained below.

Input selector	Default assignment
DVD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME/TV	IN3
AUX	- - - - -
TAPE	- - - - -
TUNER	- - - - - (Fixed)
CD	- - - - -
PHONO	- - - - -

If you’ve connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video and S-Video sources are upcon- verted* and output by the COMPONENT VIDEO MON-

ITOR OUT.

You can set this for each input selector by selecting the “- - - - -” option.

Composite video, S-Video		Component video
	IN
	OUT
Composite video, S-Video		Component video
1	Press the [Receiver] button fol-

lowed by the [Setup] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “1. Input Assign”, and then press [Enter].

The “Input Assign” menu appears.

1. Input Assign

1. HDMI Input

2.Component Video Input

3.Digital Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “2. Component
	Video Input”, and then press
	[Enter].
	The “Component Video Input” menu
	appears.
	1–2.	Component Video Input
	DVD	IN1
	VCR/DVR	- - - - -
	CBL/SAT	IN2
	GAME/TV	IN3
	AUX	- - - - -
	TAPE	- - - - -
	TUNER	- - - - -
	CD	- - - - -
	PHONO	- - - - -
4	Use the Up and Down [q]/[w] but-
	tons to select an input selector,

and then use the Left and Right [e]/[r] buttons to select:

IN1: Select if the video component is connected to COMPO-

NENT VIDEO IN 1.

IN2: Select if the video component is connected to COMPO-

NENT VIDEO IN 2.

IN3: Select if the video component is connected to COMPO-

NENT VIDEO IN 3.

- - - - -:Output composite video and S-Video sources from the

COMPONENT VIDEO MONITOR OUT.

5	Press the [Setup] button.
	The setup menu closes.

Notes:

•For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT, the “Monitor Out” setting must be set to “Analog” (see page 40), and the “Component Video Input” setting must be set to “- - - - -”. See page 23 for more informa- tion on video signal flow and upconversion.

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

43