Onkyo DTR-7.9 Error Messages, First Time Setup-Continued, Ambient noise is too high

First Time Setup—Continued

Error Messages

While the automatic speaker setup is in progress, one of the following error messages may appear:

❏Ambient noise is too high.

Auto Speaker Setup

Ambient noise is too high.

Retry

Cancel

This message appears if the background noise is too loud and the measurements cannot be performed properly.

Remove the source of the noise and try again.

Retry: Return to the measured point immediately before and start set up again.

Cancel: Cancel the automatic speaker setup.

❏Speaker Detect Error

This message appears if a speaker is not detected. “Yes” means that a speaker was detected. “No” means that no speaker was detected.

		Auto Speaker Setup
			Speaker Detect Error
FL	:	Yes	FR	:	No
SL	:	---	SR	:	---
SBL	:	---	SBR	:	---
C	:	Yes	SW	:	---

Retry

Cancel

One of the front speakers has not been detected.

		Auto Speaker Setup
			Speaker Detect Error
FL	:	Yes	FR	:	Yes
SL	:	---	SR	:	No
SBL	:	---	SBR	:	---
C	:	Yes	SW	:	---

Retry

Cancel

One of the surround speakers has not been detected.

		Auto Speaker Setup
			Speaker Detect Error
FL	:	Yes	FR	:	Yes
SL	:	---	SR	:	No
SBL	:	---	SBR	:	Yes
C	:	Yes	SW	:	---

Retry

Cancel

The surround back speakers have been detected but the surround speakers haven’t.

		Auto Speaker Setup
			Speaker Detect Error
FL	:	Yes	FR	:	Yes
SL	:	---	SR	:	Yes
SBL	:	No	SBR :		Yes
C	:	Yes	SW	:	---

Retry

Cancel

The right surround back speaker has been detected but the left surround back speaker hasn’t.

		Auto Speaker Setup
			Speaker Detect Error
FL	:	Error	FR	:	Yes
SL	:	Yes	SR	:	Yes
SBL	:	Yes	SBR :		Yes
C	:	Yes	SW	:	Yes

Retry

Cancel

The speaker type detected does not match what was expected. The speaker may be or incorrect type or broken. Please check that it is the correct speaker type, or that all drivers are working.

Auto Speaker Setup

Speaker Detect Error

Retry

Cancel

The number of speakers detected on the second or third measurement was different to the number detected on the first measurement.

Make sure speakers that cannot be detected are con- nected property.

Retry: Return to step 2 and try again. Cancel: Cancel the automatic speaker setup.

❏Writing Error!

Auto Speaker Setup

Writing Error!

Retry

Cancel

This message appears if saving fails.

Try saving again. If this message appears after 2 or 3 attempts, the AV receiver is probably malfunctioning. Contact the dealer.

Retry: Return to step 2 and try again. Cancel: Cancel the automatic speaker setup.

52