Onkyo DTR-7.9 instruction manual Positioning the XM Mini-Tuner System

Listening to the Radio—Continued

Receiver

Enter

Setup

Positioning the XM Mini-Tuner System

You can check the signal strength of the XM radio signal and adjust the position of the XM Mini-Tuner System accordingly.

1	Press the [Receiver] button, fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [Enter] button.

The Hardware Setup menu appears.

7. Hardware Setup

1. Remote Control

2.Zone2

3.Tuner

4.Analog Multich

5.HDMI

6.Network

3	Use the Up and Down [q]/[w] but-
	tons to select “3. Tuner”, and
	then press [Enter] button.
	The Tuner screen appears.
	7–3. Tuner
	SAT Radio Mode	XM
	Antenna Aiming

4	Use the Left and Right [e]/[r]
	buttons to select “XM”.

Use the Up and Down [q]/[w] but- tons to select “Antenna Aiming”, and then press [Enter].

The “Antenna Aiming” screen appears.

Note:

If the SAT Radio Mode is set to “None” (see page 60), the “Antenna Aiming” item is not available.

5	Position the XM Mini-Tuner
	Antenna so that as many bars as
	possible (up to 3) appear on the
	XM Satellite signal strength
	meter.
	The best signal is achieved when the
	antenna is pointing to the southern sky
	through an unobstructed window.

7–3.	Tuner
XM Antenna Aiming
Satellite	Terrestrial

If you cannot receive a satellite signal, position the XM Mini-Tuner System so that as many bars as possible (up to 3) appear on the XM Terrestrial signal strength meter.

Notes:

•So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terrestrial recep- tion.

•Terrestrial signals are only available in certain areas.

•The XM information is only displayed when the SAT Radio Mode is set to “XM” or “XM/SIRIUS” (see page 60).

•If you’re using both XM Satellite Radio and SIRIUS Satellite Radio and the SAT Radio Mode is set to “XM/SIRIUS” (see page 60), signal strength meters for both systems appear on the same screen.

64