Controlling Other Components—Continued

Remote Control Codes for Integra/ Onkyo Components Connected via

u

Integra/Onkyo components that are connected via u are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to con- trol components that are out of view, in a rack, for exam- ple.

1

Make sure the Integra/Onkyo component

 

is connected with an ucable and an ana-

 

log audio cable (RCA).

 

See page 38 for details.

 

 

2

Enter the appropriate remote control code

 

for the Remote Mode button.

 

[DVD] button

 

 

31612: Integra/Onkyo DVD player with u

 

[CD] button

 

 

71327: Integra/Onkyo CD player with u

 

[Tape] button

 

 

42157: Onkyo cassette recorder with u

 

 

(default)

 

See the previous page for how to enter remote

 

control codes.

3 Press the Remote Mode button, point the remote controller at the AV receiver, and operate the component.

If you want to control an Integra/Onkyo component by pointing the remote controller directly at it, or you want to control an Integra/Onkyo component that’s not con- nected via u, use the following remote control codes:

• [DVD] button

30627: Integra/Onkyo DVD player without u (default)

• [CD] button

71817: Integra/Onkyo CD player without u (default)

Note:

If you connect an u-capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or connect an RI Dock to the Game/TV jacks, for

uto work properly, you must set the Input Display accordingly (see page 48).

Resetting Remote Mode Buttons

You can reset a Remote Mode button to its default remote control code.

1

While holding down the Remote

 

 

Mode button that you want to

 

reset, press and hold down the

 

[Audio] button until the Remote

 

Mode button lights up (about 3

 

seconds).

(3 seconds)

2

Within 30 seconds, press the

 

 

Remote Mode button again.

The Remote Mode button flashes twice, indicating that the button has been reset.

Each of the Remote Mode buttons is preprogrammed with a remote control code. When a button is reset, its prepro- grammed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1

While holding down the

 

 

[Receiver] button, press and hold

 

down the [Audio] button until the

 

[Receiver] button lights up

 

(about 3 seconds).

(3 seconds)

2

Within 30 seconds, press the

 

 

[Receiver] button again.

 

The [Receiver] button flashes twice,

 

indicating that the remote controller

 

has been reset.

123

Page 123
Image 123
Onkyo DTR-7.9 123, Controlling Other Components, Resetting Remote Mode Buttons, Resetting the Remote Controller