Onkyo DTR-7.9 Basic Operations, Selecting the Input Source, Select a listening mode and enjoy

Basic Operations

Selecting the Input Source

This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).

Multi CH

Multi CH 3

1

3

1

1	AV receiver	Remote
		controller

or

Use the AV receiver’s input selector buttons to select the input source.

To select the input source with the remote controller, use the Input Selector buttons.

2	Start playback on the source component.
	When you select DVD or another video component, on your TV, you’ll need
	to select the video input that’s connected to the AV receiver’s HDMI OUT,
	COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
	On some DVD players, you may need to turn on the digital audio output.

3	AV receiver	Remote
		controller

or

To adjust the volume, use the Master Volume control, or the remote controller’s VOL [q]/[w] button.

The volume can be set to −∞ dB, −81.5 dB through +18.0 dB (relative dis- play).

The AV receiver is designed for home theater enjoyment. It has a wide volume range, allowing precise adjustment.

The volume level can also be displayed as an absolute value. See “Volume Setup” on page 106.

4	Select a listening mode and enjoy!
	See “Using the Listening Modes” on page 79.

54