16
EN
Flash (Picture Record Mode Only)
This camcorder has three ash settings. To change ash setting by either hot key (Right Button) or
Option Setting:
Auto ( • ): The ash res automatically according to light conditions. Use this mode for general
photography.
Red Eye• ( ): The pre-ash will re to reduce the red-eye effect.
Off ( • ): The ash will not re under any circumstances. Use this mode when taking images in a
place where ash photography is prohibited, or when the subject is distant (beyond the range of the
ash).
Operation Display Screen
In Picture Mode Submenu, press UP/Down button 1.
to select Flash.
Use Right/Left Buttons to move between 3 2.
settings.
Press Menu/OK Button to validate the setting.3.
Note
Theashwillbedisabledautomaticallywhenbatterypowerislow( ).
Self-timer (Picture Record Mode Only)
The self-timer allows you to take pictures with a ten-second time delay. The self-timer LED on the front
of the camcorder will also blink. The speed of blinking will increase just before the picture is taken.
Operation Display Screen
In Picture Mode Submenu, press Up/Down Button 1.
to select Self-timer.
Use Right/Left Buttons to choose On or Off. 2.
Press Menu/OK Button to validate the setting.3.