11
OPERATION6.
A camera head needs to be connected to this camera control unit from this section on.
/ Refer to the item “5. CONNECTION”, connect the equipment correctly.
0 Turn on the connected equipment and the camera.
1 When using the camera for the first time and when replacing the camera head, be sure to perform the ABB
adjustment, refer to the item “6.1 Automatic Black Balance”.
2 Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc.
3 Refer to the item “6.2 White Balance”, make the adjustment.
42EFERTOTHEITEMSh 3CENE&ILE'AIN -/$%3%44).'"94(%/. 3#2%%.$)30,!9vSELECTTHE
necessary items.

Automatic Black Balance6. 1

Black balance adjustment is necessary to get the correct black picture level.
s#LOSETHELENSIRIS
s)FTHECOLORBARPATTERNISDISPLAYEDONTHESCREENORIFTHEINDEXMENUMENUISDISPLAYEDPRESSTHE;$)30=BUTTONTO
disable the color bar pattern or the character display.
s(OLDTHE;$!4!$/7.=BUTTONFORAPPROXSECOND
s7HENTHEBLACKBALANCEADJUSTMENTOPERATIONSTARTSTHECHARACTER!""BLINKSONTHESCREEN
s7HENTHEBLACKBALANCEADJUSTMENTOPERATIONlNISHESTHECHARACTER!""STOPSBLINKINGANDTHERESULTAPPEARSFOR
approx. 1 second.
Display Meaning
ABB OK Automatic black balance adjustment finished correctly.
ABB NG
CLOSE LENS
Automatic black balance adjustment cannot be performed because the lens iris is open. Close
the lens iris.
ABB NG Automatic black balance adjustment cannot be performed.
Operate the automatic black balance again.

7HITE"ALANCE6. 2

For white balance adjustment of this unit, AWB (Automatic White Balance) and MANUAL (Manual white balance)
ADJUSTMENTSAREPROVIDED2EFERTOTHEITEMSh 7(4"!,7HITE"ALANCE-/$% 3%44).'"94(%/.
3#2%%.$)30,!9vSELECTTHEDESIREDMODE
!7"
!UTOMATIC7HITE"ALANCE
MANUAL
-ANUAL7HITE"ALANCE
Outline Adjust white balance by displaying a white object
inside the area set by AWB menu and holding the
;$!4!50=BUTTONFORAPPROXSECOND
Adjust the white balance manually using the WHT
BAL menu while shooting a white object.
Features Automatically adjusts red and blue balance based
on green for the object in the designated area .
White balance can be set manually.
Note When no white object exits in the designated area
or lighting is too blight or too dark, AWB NG is
displayed and automatic white balance adjustment
can not be performed.
Adjustment is performed by confirming with a
monitor etc.