25
PROCESS2( 5 )
Detail gain setting 0 to 31
-- 5 PROCESS2 -- (FILE A)
DTL GAIN 10
DTL FREQ 8
HV BALANCE 16/16
DNR OFF
Detail boost frequency 1 to 16
Ratio of vertical detail quantity to horizontal one
Digital noise reduction ON, OFF
Move up and down by
pushing MENU UP, DOWN
Select the desired value by
pushing DATA UP, DOWN
Changing detail (outline) gain(5. 1)
Move the “/I vTO$4,'!).BYPUSHINGTHE;-%.550=;-%.5$/7.=BUTTONS
3ELECTTHEDESIREDVALUEOFTHEDETAILGAINBYPUSHINGTHE;$!4!50=;$!4!$/7.=BUTTONS0I
;$!4!50= The detail increases.
0 10 31
The detail decreases. ;$!4!$/7.=
Change of detail boost frequency(5. 2)
This is the item for setting the screen outline thickness.
Move the “/I vTO$4,&2%1BYPUSHINGTHE;-%.550=;-%.5$/7.=BUTTONS
3ELECTTHEDETAILBOOSTFREQUENCYBYPUSHINGTHE;$!4!50=;$!4!$/7.=BUTTONS0I
;$!4!50= Thin outline
1 10 16
Thick outline ;$!4!$/7.=
Change of horizontal and vertical detail balance(5. 3)
This is the item for changing the ratio of the vertical detail quantity to the horizontal one.
Move the “/I vTO(6"!,!.#%BYPUSHINGTHE;-%.550=;-%.5$/7.=BUTTONS
3ELECTTHEVERTICALDETAILQUANTITYBYPUSHINGTHE;$!4!50=;$!4!$/7.=BUTTONS0I
;$!4!50= The vertical detail becomes larger
8/16 16/16 24/16
The vertical detail becomes smaller ;$!4!$/7.=
Changing DNR (Digital Noise Reduction)(5. 4)
Move the “/I vTO$.2BYPUSHINGTHE;-%.550=;-%.5$/7.=BUTTONS
3ELECTEITHER/.OR/&&BYPUSHINGTHE;$!4!50=;$!4!$/7.=BUTTONS0I
Note:
7HEN$.2ISSETTO/.NOISEISREDUCEDBUTSHOOTINGAFASTMOVINGOBJECTMAYAFFECTTHEVIDEOCLARITY