䋨6䋩 OPTION
| Move up and down |
| Select the desired |
|
|
|
| by pressing |
| value by pressing |
|
|
|
| MENU UP,DOWN |
| DATA UP,DOWN |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| MONITOR | PC | MONITOR | PC, TV | ||
| I/P MODE | 1080p, 1080i | ||||
| I/P MODE | 1080p | ||||
|
|
| ||||
| BAUD RATE | 9600bps | RS232C baud rate 9600bps, 19200bps | |||
|
|
|
|
|
|
|
䋨6䋮1䋩 Changing a type of output monitors
Move the “ ” to MONITOR by pressing [MENU UP], [MENU DOWN] buttons.
Select either PC or TV by pressing [DATA UP], [DATA DOWN] buttons.
䊶PC: When using PC as an output monitor.
䊶TV: When using TV as an output monitor.
䋨6䋮2䋩 Changing I/P MODE
Interlace or progressive can be selected.
Move the “ ” to I/P MODE by pressing [MENU UP], [MENU DOWN] buttons.
Select either 1080p or 1080i by pressing [DATA UP], [DATA DOWN] buttons.
䊶1080p: When using 1080 progressive.
䊶1080i: When using 1080 interlace.
Note:
Select a monitor that has 1080 progressive and/or interlace modes, or the monitor will not display the image correctly. Refer to the item "5.3 Switching I/P mode" if selecting a wrong monitor.
䋨6䋮3䋩 Changing RS 232C baud rate
Move the “ ” to BAUD RATE by pressing [MENU UP], [MENU DOWN] buttons.
Select either 9600bps or 19200bps by pressing [DATA UP], [DATA DOWN] buttons.
䋨7䋩 Returning to factory settings
The current setting can be returned to the factory default status (preset status).
(1)If the color bar pattern or characters are displayed on the screen, press the [DISP] button to disable the color bar pattern and character display.
(2)Press [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3)The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for approx. 1 second.
*The only selected scene file can be returned to the factory default status. Follow the instruction as above for every scene file when all scene files are returned to the factory default status.
25