INSTRUCTION MANUAL

MICRO CAMERA HEAD

IK-UM44H

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor- dance with the instruction manual, may cause harmful interference to radio communications. Opera- tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

SPECIFICATIONS

Image sensor

1/3 inch IT-CCD

 

 

Effective pixels

Horizontal: 768 pixels, Vertical: 494 pixels

 

 

Effective image area

Horizontal: 4.88 mm, Vertical: 3.66 mm

 

 

Resolution

Horizontal: More than 470 lines, Vertical: More than 350 lines

 

 

Standard intensity of

40 lx (F1.6, 3000K)

illumination for objects

 

 

 

Minimum intensity of

3.5 lx (F1.6, 3000K)

illumination for objects

 

 

 

Weight

0.32 oz (9g)

Design and specifications are subject to change without notice.

OPTIONAL PARTS

For further details, contact your camera dealer.

USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party responsible for compliance to Part 15 of the FCC rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

CAUTIONS ON USE

Please use this apparatus by connecting only with camera control unit IK-CU44A.

Read the "CAUTIONS ON USE AND INSTALLATION" in the instruction manual of IK-CU44A, and follow them.

Camera control unit

Type name

IK-CU44A

Lens

Type name

Focal length mm

F stop

JK-L03U

3.0

2.0

JK-L55U

5.5

1.6

JK-L11U

11.0

2.0

JK-L18U

18.0

3.3

 

 

 

EXTERIOR DIMENSIONS

Camera cable

Type name

Nominal length m

Diameter mm

EXC-4302

2

5.0

EXC-4303

3

5.0

EXC-4305

5

5.0

EXC-4312

12

5.0

EXC-4320

20

5.0

EXC-4330

30

5.0

EXC-4354 is not applicable for this model.

COMPONENTS

Camera Head

Camera Holder

Unit : mm [inch]

 

 

ø : diameter

(1)

Camera head (without lens)

1

(2)

Accessories

 

 

(a) Camera holder

1

 

(b) Instruction manual

1

 

36

 

 

[1.42]

 

6.6

7.6

19.9

[0.26]

[0.30]

[0.783]

FOCUSLOCK

Ø 12 [0.472]

 

.5

Ø

11

.453]

 

[0

 

 

 

CONNECTION

IK-CU44A (option)

Camera control unit

 

 

VIDEO

Lens

 

 

(option)

Camera head

 

 

CAMERA

DC IN 12V

 

Camera cable

DC Supply

 

(option)

 

 

(12V)

When connecting or discon- necting the camera cables (for the camera head and camera control unit), always turn off the power switch of the camera control unit first. If not, the camera head may be damaged.

2.6

 

 

[0.10]

 

6

9

(in air 7.2)

[0.236]

[0.354]

[0.283]

 

CCD image plane

 

11.6

[0.457]

 

 

 

4

30

 

[0.157]

[1.18]

 

2- Ø 3 hloe

14

 

[0.118]

[0.55]

 

 

10.5

[0.413]

 

20

 

 

[0.787]

 

Tri-pot screw (1/4-20UNC)

 

LIMITED WARRANTY

TOSHIBA CCD CAMERA

Promptly register your product with Toshiba on-line at www.toshiba.com/taisisd. By registering your prod- uct you will be eligible for periodic updates, announcements, and special offers. You will have access to extended warranty options, upgrades (as applicable), useful tips, on-line troubleshooting, and the ability to schedule ser- vice on-line if necessary. The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following limited warranties. These limited warranties extend to the Original End-User ("Your[r]").

Limited One (1) Year Warranty of Labor and Parts

ISD warrants this product and parts against defects in material or workmanship for a period of one year from the date of original retail purchase by the end-user. During this period, ISD will repair or replace a defective product or part with a new or refurbished item. The user must deliver the entire product to an ISD authorized service center. The user is responsible for all transportation and insurance charges for the product to the Service Center. ISD reserves the right to substitute Factory Refurbished Parts and / or Factory Refurbished Product in place of those in need of repair.

Step-by-step Procedures - How to Obtain Warranty Service

[1]Verify operation of the unit by checking the instruction manual

[2]If there is a defect in material or workmanship, contact an Authorized Service Provider within 30 days after the product fails to comply with specifications.

[3]Arrange for delivery of the product to the ISD authorized service center. Products must be insured and se- curely packed, preferably in the original shipping carton. A letter explaining the defect and a copy of the bill of sale or other proof of purchase must be enclosed with a complete return street address and daytime telephone num- ber. Charges for transportation and insurance must be prepaid by the end-user.

Questions? If you have any questions, please check the Toshiba Imaging Systems Division Web site as follows:

Website: http://www.toshiba.com/taisisd/indmed

Your Responsibility, warranties are subject to the following conditions:

[1]You must retain the bill of sale or provide other proof of purchase.

[2]You must schedule service within thirty days after you discover a defective product or part.

[3]All warranty servicing of this product must be made by a Toshiba ISD Authorized Service Provider.

[4]The warranty extends to defects in material or workmanship as limited above, and not to any products or parts that have been lost or discarded by user. The warranty does not cover damage caused by misuse, accident, improper installation, improper maintenance, or use in violation of instructions furnished by ISD. The warranty does not extend to units which have been altered or modified without authorization of ISD, or to damage to products or parts thereof which have had the serial number removed, altered defaced or rendered illegible.

ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT- ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply. WITH THE EXCEPTION OF ANY WARRAN-

TIES IMPLIED BY STATE LAW AS HEREBY LIMITED, THE FOREGOING EXPRESS WARRANTY IS EXCLU- SIVE AND IN LIEU OF ALL OTHER WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROD- UCTS OR PARTS. IN NO EVENT SHALL ISD BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAM- AGES. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply.

No person, agent, distributor, dealer, service station or company is authorized to change, modify or ex- tend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of ISD arising under this warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law. Some states do not permit limitation of the time within which you may bring an action beyond the limits provided by state law so the above provision may not apply to user. This warranty gives the user specific legal rights, and user may also have other rights, which may vary from state to state.

TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

Imaging Systems Division

Copyright © 2002 Toshiba America, Inc. All rights reserved.

DISCLAIMER

We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases:

1.Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions.

2.Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of business activities.

3.Incorrect use not in compliance with instructions in this instruction manual.

4.Malfunctions resulting from misconnection to other equipment.

5.Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized third party.

6.Notwithstanding the foregoing, Toshiba’s liabilities shall not, in any circumstances, exceed the purchase price of the product.

COPYRIGHT AND RIGHT OF PORTRAIT

There may be a conflict with the Copyright Law and other laws when a customer uses, displays, distributes, or exhibits an image picked up by a television camera without permission from the copyright holder. Please also note that transfer of an image or file covered by copyright is restricted to use within the scope permitted by the Copyright Law.

CAUTIONS ON USE AND INSTALLATION

Carefully handle the units.

Do not drop, or give a strong shock or vibration to the camera. This may cause problems. Treat the camera cables carefully to prevent cable problems, such as cable breakdown and loosened connections.

Do not shoot intense light.

If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may occur. When intense light enters, vertical stripes may appear on the screen. This is not a malfunction. Ghosts may occur when there is an intense light near the object. In this case, change the shooting angle.

Install the camera in a location free from noise.

If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on the screen. In such a case, try to change the location of the camera or the cable wiring.

Moire

When thin stripe patterns are shot, stripe patterns that are not actually there (moire) may appears as interfer- ence stripes. This is not a malfunction.

Operating ambient temperature and humidity.

Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality will lower and internal parts may be damaged.

Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, de- pending on the conditions of the object and the camera (for example when the gain is increased), noise in the form of vertical strips or white dots may occur. This is not a malfunction.

Handling of the protection cap.

Keep the protection cap away from children. Children may put them into mouth or swallow them accidentally. The protection cap protects the image sensing plane when the lens is removed from the camera, do not throw away.

When not using the camera for a longtime. Stop supplying power.

When cleaning the camera

Always turn off the power and clean with a piece of soft dry cloth. Do not use benzine, alcohol, thinner, household detergents, chemically treated cloths, etc. If used, coating and printed letters may be discolored. When cleaning the lens, use a lens cleaning paper, etc.

Avoid using or storing the camera in the following places: Places filled with highly flammable gas.

Places near gasoline, benzene, or paint thinner. Places subject to strong vibration.

Places contacting chemicals (such as pesticides), rubber or vinyl products for a long period of time.

Page 1
Image 1
Toshiba IK-UM44H instruction manual Disclaimer, Copyright and Right of Portrait

IK-UM44H specifications

The Toshiba IK-UM44H is a cutting-edge imaging solution designed for a variety of industrial and scientific applications. This camera is particularly well-regarded in the fields of machine vision, robotics, and advanced surveillance, owing to its high performance, reliability, and innovative features.

One of the standout features of the IK-UM44H is its impressive resolution. With a maximum resolution of 4 megapixels, the camera offers detailed imaging that is crucial for applications requiring high clarity and precision. This high resolution is complemented by a global shutter, which allows for fast object movement to be captured without the distortion often found in rolling shutter systems. This feature is particularly valuable in dynamic environments, such as production lines, where rapid movement is common.

The camera employs advanced CMOS imaging technology, significantly enhancing its performance in low-light conditions. The low noise characteristics of the IK-UM44H allow for clear images even in challenging lighting scenarios. This makes it suitable for applications in various environments, from factory floors to outdoor surveillance.

The IK-UM44H supports multiple output formats and interfaces, providing versatility in integration with existing systems. It offers USB 3.0 and GigE Ethernet connectivity, ensuring high-speed data transfer and making it compatible with a wide range of computers and systems. This flexibility allows engineers and developers to easily integrate the camera into their projects without extensive modifications.

Another key characteristic of this camera is its compact and robust design. Built to endure the demands of industrial environments, the IK-UM44H is both lightweight and durable. Its rugged casing and compliance with international standards make it an ideal choice for various mounting options and installations.

The Toshiba IK-UM44H also features advanced image processing capabilities, including built-in algorithms to enhance image quality, such as image stabilization and noise reduction. These features contribute to producing high-quality images, which are essential for accurate analysis and decision-making within industrial settings.

In summary, the Toshiba IK-UM44H is an innovative imaging device that combines high resolution, advanced imaging technologies, robust connectivity options, and comprehensive processing capabilities. Its design and performance make it an optimal choice for professionals seeking reliable and high-quality imaging solutions in industrial and scientific applications.