NOTICE PREPARATION INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION

TIMER RECORDING

There are two kinds of timer recording. One is daily timer recording, and the other is weekly timer recording.
Once the timer programs are set, the VCR can retain all programmed information in the event of a power failure (10 day maximum
memory storage). Before setting timer programs, make sure that the present time is correct. (See page 15 ~ 16.)

Setting the Timer Program

The timer programs are set on the two pages of PROGRAM screen which provides “on/skip”, start time, end time and recording
time mode for setting.
The blinking position moves to right direction or downward with the SHIFT button, and to opposite direction with SHIFT
button. When the program event is set to SKIP, timer recording will not be carried out even if the start or end time is set.
PROGRAM Screen (1) PROGRAM Screen (2)

Daily Timer Recording

To record every day for certain period starting at certain time, set daily timer recording.
In case of recording every day from 8:30 to 17:00 in A24 mode;
Ending hour display
Recording time display
Ending minute display
Starting minute display
Monday 1
2
Tuesday 1
2
Wednesday 1
2
Thursday 1
2
Starting hour display
ON, SKIP displays
Friday 1
2
Saturday 1
2
Sunday 1
2
Daily

25

1Press the DISPLAY
button. The MENU
screen appears on the
monitor screen.
2Press the or
SHIFT button to blink
PROGRAM.
3Press the + or – SET
button.
4Press the SHIFT
button to proceed to
PROGRAM screen (2).
Then ON of MO1 line blinks
on Program Screen (1).
120H of DLY line blinks.
5Press the SHIFT
button to blink start time
of DLY line, and press
once the + or – SET
button to display the
present time.
DISPLAY
TIME MODE
SET
SHIFT TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT TRACKING
LOCATION SELECT
+–