Toshiba KV-7168A - page 46

NOTICE PREPARATION INTRODUCTION

RECORDING

OPERATION

PLAYBACK

OPERATION

Order of Daily Checks

1Turn the power ON for this VCR and for the connected

devices in the surveillance system including the video

camera and monitor TV. 6Press the PLAY button.

2Does the correct picture appear in the monitor TV?

3Is the date-time display correct on the monitor TV?

4Rewind the tape several digits on the section you

recorded the previous day.

5Press the or TIME MODE button to go to the

A2-hour mode.

7Is the playback picture normal?

Is there anything abnormal about the recorded date

and time?

8Press the REC button.

9Check the playback picture recorded in A2 hour mode.

10

After checking these matters change to the mode you

want to set to.

123

8/28/96 WED

17:30:06 A2

123

DAILY AND PERIODIC INSPECTION

This VCR has been designed to stand the use over long periods. Nevertheless, we recommend you to carry out regular daily

inspection to insure problem-free use.

Note:

It is particularly important to carry out daily checks when using the VCR for repeat recording.

Contents

Main Instruction Manual VIRTUAL REAL-TIME & TIME LAPSE VCR KV-7168A PLEASE READ INTRODUCTION 1 IMPORTANT PRECAUTIONS 2 IMPORTANT SAFETY INSTRUCTIONS Page I FEATURES 4 TABLE OF CONTENTS Page Page Rear Panel A Word on the Exclusive 3N-100AAS Battery Pack Charging the Battery Pack Connector Battery Installation Specification of Battery VCR DISPLAY 9 WIRED REMOTE CONTROL (Option) 10 CONNECTIONS Connection with a Video Camera camera P 11 VIDEO Monitor TV QUAD ONLYSWITCHED OFF Typical Connection with the Sequential Switcher CONTENTS OF SCREEN DISPLAY 13 PROGRAM Screen Setting of timer recording. ALARM RECALL Screen TIME DATE SEARCH Screen Alarm recall display Set the day and time to be searched and searching direction. 2 3 6 7 9 8 8/28/96 WED 17:30:02 A 2 Playback/Recording time Date1 Day of the week2 DISPLAY SCREEN 17 } } 2 COUNTER DISPLAYS 19 3 4 Tape Remain Error Message HOW TO OPERATE 24 HOUR VIRTUAL REAL TIME MODE SETTING THE RECORDING/PLAYBACK TIME 21 LOADING AND UNLOADING A VIDEO CASSETTE Loading a cassette Unloading a Cassette 1 2 Safety Tab Cassette Indicator RECORDING 1 23 2 4 3 RESTART RECORDING Setting the Restart Recording 24 TIMER RECORDING 2 Setting the Timer Program 5 3 Daily Timer Recording 7 9 8 Weekly Timer Recording 3 7 6 button. 5Press the + SET button to set the starting hour to 8 and press the 9 to set to A18. 8/28/96 WED TIMER Press the TIMER button. ALARM RECORDING 29 Operation at Alarm Input Event Recording Warning at Alarm Recording Connecting the Alarm Terminals Setting the Alarm Recording 3 4 5 32 ONE-SHOT RECORDING 1 Operation of One-shot Recording 4 3 2 5 7 8 To release the One-shot Recording mode OPERATION AFTER TAPE END DETECTION 34 How to Set to Stop at End of Tape How to Set to Auto Rewind at End of Tape How to Set to Repeat Record at End of Tape RECORDING WITH THE SEQUENTIAL SWITCHER Connection with the Sequential Switcher ABCDABCD Timing for Camera Switching Video track Vertical synchronization 3 4 1 39 PLAYBACK 2 3 4 Using the SHUTTLE Dial SHUTTLE dial STOP PLAYBACK IN VARIOUS MODES Picture Search 41 Slow Playback Reverse Playback 2 42 Search Operation 6 5 1 2 3 4 SIGNAL LEVELS OF INPUT/OUTPUT TERMINALS N 44 Page Steps to Take after Daily Checks 3 Tape Usage Frequency A Request for Periodic Checks Dew Condensation CAUTIONS DURING USE Installation Function/Operation Recording BEFORE CALLING SERVICE PERSONNEL 48 Playback Other matters Cautions: SPECIFICATIONS 50