NOTICE PREPARATION INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION
2Press the RESET button at the location you want to
see.
COUNTER DISPLAYS
Counter Memory
When the counter is set to “0000” at a location that you want to see again during recording and playback, the tape will stop in the
vicinity of “0000” during rewind and fast forward.
1When the alarm counter is displayed, press the
ALARM button to set the display to the counter
display.
4Turn the SHUTTLE dial to set rewind or fast forward
after STOP button is pressed.
3Press the COUNTER MEMORY button to make
“COUNT.M” (Counter Memory) to light.
Alarm Memory
When you want to view the location where alarm recording was performed.
1Press the STOP button.
2Press the COUNTER MEMORY button twice to make
“ALARM. M” to light.
3Turn the SHUTTLE dial to set rewind or fast forward.
4Press the PLAY button.
When the tape reaches the
alarm recorded position, The
VCR automatically enters the
still picture mode.
COUNT.
MH
SP
REC
COUNT.
MH
SP
REC
H
SP
REC ALARM
H
SP
ALARM
ALARM
MH
PLAY SP
ALARM
ALARM
MH
SP
COUNTER
ALARM RESETMEMORY
COUNTER
ALARM RESETMEMORY
COUNTER
ALARM RESETMEMORY
PLAY STOP
COUNTER
ALARM RESETMEMORY
PLAY STOP
REV FWDREV FWDREV FWD
REV FWDREV FWDREV FWD
REC ALARM
H
SP