L350/L350D

Simplified steps for making a DVD-Video from adding video source:

1.Click Start ->All Programs ->DVD Movie Factory for TOSHIBA ->Ulead DVD Movie Factory for TOSHIBA Launcher to launch DVD Movie Factory.

2.Click Video Disc -> New Project to invoke 2nd Launcher, choose your project type, then invoke DVD Movie Factory.

3.Add source from HD Disk by click Add Video files button to invoke browser dialog box.

4.Choose the source video then go to Next page to apply Menu.

5.After choose the menu template, press Next button to go to Burning Page.

6.Choose the output type then press Burn button.

How to learn more about Ulead DVD Movie Factory®

Please refer to the Help and Manual files for additional Ulead DVD Movie Factory information.

Important information for use

Note the following limitations when you write Video DVD:

1.Editing digital video

■Log in with Administrator rights to use DVD Movie Factory.

■Make sure that your computer is running on AC power when using DVD Movie Factory.

■Operate the computer at Full Power. Do not use power-saving features.

■While you are editing DVD, you can display preview. However, if another application is running. The preview might not display properly.

■DVD Movie Factory cannot edit or play copy protected content.

■Do not enter sleep or hibernation mode while using DVD Movie Factory.

■Do not operate DVD Movie Factory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.

■When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.

■CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD functions are not supported in this version.

■While recording video to DVD, please close all other programs.

■Do not run software like a screen saver because it can put a heavy load on the CPU.

■Do not support mp3 decode and encode.

4-12

User’s Manual