Toshiba L635 - page 79

3.2 Quick Start 3 Diagnostic Programs

Satellite/Satellite Pro L630/L635 Maintenance Manual

 Script File Name: Script file name, e.g. ‘Custom.INI’ in the above screen;

 Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2008-02-16 00:42:40’ in

the above screen;

 Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining

test time at the same location as Current TIME (C. TIME) in the above screen;

 Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number

planning to execute and the current LOOP number have been finished, e.g. ‘COUNT:

01/01’ in the above screen;

 CPU Temperature: Detect the temperature in the current CPU, e.g. ‘CPU: 56C’ in the

above screen;

 Remaining Battery Capacity: Remaining Battery Capacity detected in the current

Battery, e.g. ‘BAT: 46%’;

 Test Order: Define the test sequence. There is two sequence modes: Sequential Test

Mode and Random Test Mode. The default mode is Sequential Test Mode, it would

displays ‘ORDER: SEQ’ as in the above screen;

 LOG File Name: Display the file name of the test log, e.g. Custom.Log in the above

screen;

 Start Test Time (S.TIME): Display the test start time for the current test item or the test

script, e.g. ‘S.TIME: 2008-02-16 00:42:28’ in the above screen;

 Break On Error: Display ‘HALT’ as shown in the above screen when ‘Break On Error’

is enabled;

 Wait On Error: Display ‘WAIT’ as shown in the above screen when ‘Wait On Error’ is

enabled;

 Pause Enable: Display ‘PAUSE’ when “Pause Enable” is enabled;

 Manual Interrupt Method: Display ‘Esc: Break’ to tell the user how to manually

interrupt the test process.