155
Utilities
Setting passwords
6Click OK.
The supervisor password utility dialog box appears.
7Select Able to run HWSetup or Unable to run HWSetup
and then Click OK.
8Restart the system to complete the process.
Deleting a supervisor password
To delete a supervisor password:
1Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA Assist.
The TOSHIBA Assist window appears.
2On the left side, click the Secure tab.
3Click the Supervisor Password icon.
The Supervisor Password tab of the TOSHIBA Password
Utility window appears.
4Click Not Registered.
A pop-up screen appears asking for a password.
5Enter the password, then click OK.
6Click OK to exit.
7Restart the system to complete the process.
Using a user password
A user password provides power-on password protection.
Setting a user password
If you choose to set a supervisor or user password, TOSHIBA
strongly recommends that you save your password in a location
where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your
organization or others as a result of the inability to access your
computer.