HW Setup

If a Supervisor Password has been set, manual boot device selection functions may be restricted.

The boot device selection methods described above will not change the boot priority settings that have been configured in HW Setup. In addition, if you press a key other than one of those listed, or if the selected device is not installed, the system will continue to boot according to the current and available settings in HW Setup.

Boot Speed

This feature allows you to select system boot-up speed.

Fast

Reduces system boot-up time. System can boot only

 

from the built-in HDD and only internal LCD and

 

keyboard are supported during the boot process.

 

 

Normal

System boots up at normal speed. (Default)

Panel Open - Power On

This feature allows you to change the Panel Open - Power On setting.

Enabled

Enables the Panel Open - Power On function. When

 

you open the display panel while your computer is

 

turned off, the system will boot up automatically.

 

 

Disabled

Disables the Panel Open - Power On function.

 

(Default)

The Panle Open - Power On feature is supported with some models.

Keyboard

Wake-up on Keyboard

When this feature is enabled, and the computer is in Sleep Mode, you can turn on the system by pressing any key. However, please be aware that this option will only work with the internal keyboard and only when the computer is in Sleep Mode.

Enabled

Enables the Wake-up on Keyboard function.

Disabled Disables the Wake-up on Keyboard function (Default).

LAN

Wake-up on LAN

This feature lets the computer's power be turned on from shutdown when it receives a wake-up packet (Magic packet) from the LAN.

Do not install or remove a memory module while Wake-up on LAN is enabled.

User’s Manual

7-4