2 • Installing the Ceiling Plate
CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
Note: The isolators must be flush against the ceiling. A loose ceiling plate will result in improper operation of the Perfect BalanceTM system.
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten.
Isolator
Ceiling
Plate
Step |
Steps |
For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak.
5