7 • Activating Perfect BalanceTM
7-1. If you are using one of the enclosed downrods, it is now time for you to activate the Perfect BalanceTM system by removing the five red retaining screws. Rotate the blades slowly until one of the red retaining screws is visible through the notch in the mounting plate. Remove the retaining screw from the bottom of the fan housing using a screwdriver. Repeat this process for all 5 retaining screws.
Note: After the retaining screws are removed, the blades will feel loose. This is normal, as loose blades are a characteristic of the Perfect BalanceTM system.
7-2. If you are using a downrod longer than 6 inches, leave the retaining screws in their place and continue the installation process.
Switch Housing
Mounting Plate
Red Retaining
Screws
11
42775-01 • 04/29/08 • Hunter Fan Company