Hunter Fan 42775-01 warranty Installing the Glass Bowl

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

8-8.	First install B10 candelabra bulbs (60 Watt Maximum) into the
	sockets.
8-9.	If the fandangle is attached to the extra pull chain, remove it now.
8-10.	Attach the extra pull chain (included) to the fan pull chain using
	the plastic breakaway connector. (You may find the plastic
	breakaway connector on the end of the extra chain.)
8-11.	Thread the fan pull chain through the hole in the metal disc. Then,
	thread the fan pull chain through the hole in the center of the glass
	bowl.
8-12.	Thread the light pull chain through the hole in the center of the
	glass bowl. Then, Thread the light pull chain through the hole in
	the center of the cover plate.
8-13.	Thread the fan pull chain through the grommet hole in the side of		Light Bulb
	the cover plate.		Sockets
8-14.	Place the cover plate up against the		(B10
			Candelabra-
	glass bowl. Align the holes in the cover		Based 60 Watt
	plate and glass bowl.		Maximum)
8-15.	Thread the light pull chain through		Metal Disc
	the finial and screw the finial onto the		Metal Rod
	threaded rod end until tight.
8-16.	Reattach the fandangle to the extra pull
	chain.		Glass Bowl
			Cover Plate
		Breakaway	Finial
		Connector

14

42775-01 • 04/29/08 • Hunter Fan Company