6 • Assembling the Blades
6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.
6-3. Loosen the blade iron armature screws that are holding the shipping bumpers in place. Push the shipping bumpers in, then lift them off.
6-4. Slide the blade irons onto the blade iron armature screws. Tighten the blade iron armature screws as tight as possible with a screwdriver.
Step 6-1
Grommet
Blade Assembly
Screw
Steps 6-1 – 6-2
Blade Assembly
Screw
Grommet
Blade
Blade Iron
Armature Screw (tighten securely)
Shipping
Bumper
Blade
Iron 
Blade Iron
Armature Screws
42775-01 • 04/29/08 • Hunter Fan Company
