Hunter Fan 42775-01 warranty Assembling and Hanging the Fan, For Standard or Angled mounting

3 • Assembling and Hanging the Fan

3-1. Unbundle the wires from the fan.

Note: Your Hunter fan comes with an optional downrod extension pipe. If you are hanging the fan on a ceiling higher than 10 feet tall and you would like to use the enclosed optional downrod, follow Steps 3-9 – 3-13 on the next page.

WARNING: Fan may fall if not assembled as directed in these installation instructions.

For Standard or Angled mounting:

3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod.

3-3. Loosen the square head set screw on the adapter to install the pipe and ball assembly. Note: When the pipe and ball assembly is fully installed, 2-3 threads on the pipe will still be visible; this is normal. Securely retighten the set screw with a wrench or pliers.

CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod.

3-4. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim.

Steps 3-2 – 3-3

Downrod

Canopy

Canopy

Trim Ring

Set Screw

Step 3-4

U-shaped

Hole

6

42775-01 • 04/29/08 • Hunter Fan Company