Hunter Fan warranty 42775-01 04/29/08 Hunter Fan Company

8 • Completing Your Installation With or Without a Bowl Light Fixture

Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture.

Note: This fan is to be installed ONLY with the enclosed light kit. Use of another light kit will result in improper performance of the fan and will void the warranty.

WARNING: Use only the light fixture supplied with this fan model.

8-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

8-2. Feed the upper plug connector through the center opening of the housing.

8-3. Align the keyhole slots in the housing with the housing assembly screws.

8-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

Steps 8-1 – 8-3

Upper

HousingSwitch

Assembly Housing

Screw

CAUTION: Make sure the upper switch housing is securely attached to the switch housing mounting plate. Failure to properly attach and tighten all three assembly screws could result in the switch housing and light fixture falling.

8-5. If you want to install the light fixture, proceed with Step 8-6 now.

If you do not want to install the light fixture, you need to uninstall it now. See “Uninstalling the Light Fixture” on Step 8-17. Once you have uninstalled the light fixture, continue with Step 8‑6.

12

42775-01 • 04/29/08 • Hunter Fan Company