C670/C670D/L770/L775/L770D/L775D
to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps below:
When the sound mute feature has been activated by pressing the FN + ESC key, be sure to disable this to allow sounds to be heard before starting the restore process. Please refer to The Keyboard in Chapter 3, Operating Basics, for further details.
You can not use System Recovery Options if restoring the
When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.
1.Load the Recovery Media into the optical disc drive.
2.Turn off the computer's power.
3.While holding down F12 key on the keyboard, turn on your computer - when the TOSHIBA Leading Innovation >>> logo screen appears, release the F12 key.
4.Use the up and down cursor key to select the appropriate option from the menu according to your actual recovery media. Please refer to the Boot Setting section for further information.
5.A menu will be displayed from which you should follow the
When drivers/utilities are installed, you can setup the respective drivers/ utilities from the following place. To open the setup files, Click Start
If you have previously chosen to remove the recovery partition and are trying to create "Recovery Media", you will see the following message:
"The Recovery Media Creator can not be launched because there is no recovery partition."
When there is no recovery partition, the Recovery Media Creator cannot make Recovery Media.
However, if you have already created a "Recovery Media", you can use it to restore the recovery partition.
If you have not created "Recovery Media", please contact TOSHIBA support for assistance.
Restoring theA portion of the total hard disk drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore
User's Manual |