129
Expansion Options
Using external display devices
5.375 x 8.375 ver 2.3
3Release the Fn key.
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Using the Cross-Functional button
The Cross-Functional button, located on the front of the
display (the left-most button at bottom right), can be used to
select t he externa l display device. Press and hold the Cross-
Functional button for two seconds until the external display screen
displays. For more information, see “Cross Menu Utility” on
page 174.
Adjusting the quality of the external display
To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode,
you must set the resolution of the internal display panel to
match the resolution of the external display device. The
external display device must support a resolution of 800 X 600
or higher.
If you have your internal display set to horizontal landscape
and then rotate the internal display to a portrait style, images
will not display properly on an external display or other exter-
nal device (for example, a projector) unless you change the
internal device’s setting to primary landscape. This is a techni-
cal restriction.
When the display is rotated, the display orientation on the
external display will also rotate.