98 Learning the Basics
Using Standby
5.375 x 8.375 ver 2.3
Set this option to Hibernation so that the computer
will go into Hibernation mode when you close the
display panel.
7Click Apply.
8Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.

Starting again from Hibernation

To start up the computer from Hibernation mode, slide and
release the power button until the on/off icon glows green.
The computer returns to the screen you were using.
If you went into Hibernation mode by closing the display
panel, you can start the computer again by opening the
display panel.
Using Standby
If you are not connected to a Windows® network server
(domain server), power down the computer using the Standby
command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window with Stand By option
2Click Stand By.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power