84 Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
7Gently press the disc onto the center spindle until you
feel it click into place.
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Do not touch the surface of the disc. Do
not stack discs. If you incorrectly handle the discs, you could
lose data.
8Make sure the disc is completely on the spindle and is
lying flat on the tray.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact your Toshiba support for assistance.
9Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing compact discs
To remove a compact disc (CD or DVD) with the computer
turned on:
1Press the eject button on the drive.
Do not press the eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
2Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3Gently push the tray in to close it.