3.11Error Codes and Description 3 Diagnostic Programs

EQUIUM M40/M45/Satellite M40/M45 Maintenance Manual 59
01
PCI bus Error during
device ID test Don’t Scan PCI device Don’t support PCI BIOS
02
PCI Ethernet card not
present during device ID
test Don’t find Net card Please insert Net cad
03
Intel PCI Ethernet card
not present during MAC
test
Don’t found Net Card, This Card
can’t be Read MAC by this
method
Please update net card or use
other method
09xx Keyboard
01
Keyboard Map & Stroke
Test Fail Keyboard Map & Stroke Test
fails. Check the KBD connection and
repeat the test.
03 Clock Line Test Fail Clock Line Test fails. As above.
04 Data Line Test Fail Data Line Test fails. As above.
05xx Mouse
01 Touch Pad Test Fail Touch Pad Test Fail Check the mouse connection and
repeat the test.
28xx 1394
01 Can not find IEEE1394
controller Don’t support 1394.
20xx IDE-HDD
01 Get Parameter Fail ! Wrong test parameters are input
by user. Reinput the correct parameters.
02 Write Pattern Error HD is damaged. Send the HD for repair.
03 Data Compare Error HD is damaged. As above.
04 Read Verify Error HD is damaged. As above.
05 Seek Error HD is damaged. As above.
06
Disk Controller Self Test
Failed The HD controller is damaged. As above.
07
Disk Controller Test
unexpected interrupt
Failed The HD controller is damaged. As above.
09
Disk Controller action
Test Failed The HD controller is damaged. As above.
10
Disk dos not support
SMART Disk dos not support SMART Change HD which supported
SMART and test again
11
Disk read attribute
threshold error Disk read attribute threshold
error Send the HD for repair.
12
Disk read attribute value
error Disk read attribute value error As above.
13 Disk SMART attribute Disk SMART attribute value As above.