Toshiba MD-0101 manual ADU feed roller shaft lower/clutch 08S018-06CL, Remove timing belt. See Fig

9. Detach stop ring, remove 2 bushings, and re-	ADU feed roller
Stop ring	shaft middle
move ADU feed roller shaft middle.
Bushing

Bushing

242

Fig. 6-22

[I] ADU feed roller shaft lower/clutch 08S018-06CL

1.	Detach ADU hinge cover F. (See Fig. 6-1)
2.	Detach ADU hinge cover R. (See Fig. 6-2)
3.	Remove ADU paper guide assembly.
	(See Fig. 6-3 and 6-4)
4.	Remove ADU. (See Fig. 6-5 to 6-9)
5.	Detach ADU cover. (See Fig. 6-10 to 6-12)
6.	Detach PWB cover. (See Fig. 6-13)
7.	Remove timing belt. (See Fig. 6-21)

ADU PWA

ADU motor bracket lower

CN215

Clamp

Connector

Screw

8.	Detach one connector from ADU PWA (CN215).
9.	Remove 4 screws, release one clamp, and re-
	move ADU motor bracket lower.

Harness

Fig. 6-23

243

10. Detach the E-ring, remove clutch 08S018-06CL

and 2 bushings, and remove ADU feed roller

shaft lower.

Bushing

ADU feed roller shaft lower

Clutch 08S018-06CL

Bushing

E-ring	ADU feed roller
	shaft lower
		244

Fig. 6-24

October 2000 © TOSHIBA TEC 6 - 7 MD-0101 DISASSEMBLY AND REPLACEMENT