Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks
EA20
When replacing, be sure not to scratch the shaft (ASYB-SFT-EXT-RLR-DRV-
BUF).
B. Check if the gear teeth of GEAR-IDLER-EXT-BUF, GEAR1-EXT-RLR-BUF and GEAR2-EXT-RLR-BUF mesh
correctly. If any of them does not mesh correctly, replace ASYB-SFT-EXT-RLR-DRV-BUF, ASYS-LVR-E-RLR-
BUF, GEAR-IDLER-EXT-BUF, GEAR1-EXT-RLR-BUF or GEAR2-EXT-RLR-BUF.
- Paper jams at the
entrance section of
the Finisher (or the
Hole Punch Unit)
- Folded paper edge
- Paper jams C2in the
buffer tray section
- C2Paper exit
problems on the
finishing tray
8. Drive not transmitted from the
gear in the paper transport
section
A. Check if there is any rattling on ASYS-LVR-E-RLR-BUF. If there is, replace ASYB-SFT-EXT-RLR-DRV-BUF,
ASYS-LVR-E-RLR-BUF, GEAR-IDLER-EXT-BUF, GEAR1-EXT-RLR-BUF and GEAR2-EXT-RLR-BUF.
GEAR1-EXT-RLR-BUF
GEAR-IDLER-EXT-BUF
GEAR2-EXT-RLR-BUF
ASYS-LVR-E-RLR-BUF
ASYB-SFT-EXT-RLR-DRV-BUF
Check that there is no rattling.
GEAR1-EXT-RLR-BUF
GEAR-IDLER-EXT-BUF
GEAR2-EXT-RLR-BUF
ASYS-LVR-E-RLR-BUF
ASYB-SFT-EXT-RLR-DRV-BUF
Do not scratch this area.
LVR-E-RLR-BUF
ASYB-SFT-EXT-RLR-DRV-BUF
SFT-EXT-RLR-DRV-BUF
Scratch on the shaft
㪋