Installation Notes

ƒThe drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion.

ƒIn order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB.

ƒSpace should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.

ƒThe temperature of the top cover and the base must always be kept under 60C to maintain the required reliability.

ƒBe sure not to cover the breathing hole to keep the pressure inside the drive at a certain level

ƒDo not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N.

ƒThe drive contains several parts which may be easily damaged by ESD (Electric Static Discharge). Avoid touching the interface connector pins and the surface of PCB. Be sure to use ESD proof wrist strap when handling drive.

ƒThe four mounting screws should be tightened equally with 0.3N-m (3kgf-cm) torque. The depth should be 3.0mm minimum and 3.5mm maximum.

Placing Hard Drive inside your Computer

•Determine mounting configuration (the drive can be mounted in either a horizontal or vertical orientation)

•Configure drive for system application.

•Configure the adapter board for the specific system application (if required).

•Install adapter board into an unused PC/AT 16 bit slot (if required).

•Install the I/F cable to the system's 44 pin connector port or adapter board. Ensure pin 1 is oriented correctly, (pin 1 on the cable is usually identified by a red or blue strip.)

•Set correct drive type in system CMOS

•Refer to applicable manuals for software installation instructions.

Important Note: Disconnect power from your computer system before beginning installation.

Figure 2.HDD Mounting Holes

3

Page 4 Page 6
Page 5
Image 5
Toshiba MK1016GAP user manual Installation Notes, Placing Hard Drive inside your Computer
Page 4 Page 6

MK1016GAP specifications

The Toshiba MK1016GAP is a notable addition to the realm of hard disk drives (HDDs), designed primarily for mobile applications such as laptops and portable devices. Launched as part of Toshiba's MK series, this 1TB hard drive is recognized for its impressive balance of performance, efficiency, and reliability, making it a favored choice among manufacturers and consumers alike.

One of the main features of the MK1016GAP is its form factor. It adheres to the standard 2.5-inch size, which is ideal for integration into slim and lightweight laptops. This compact design does not compromise on storage capacity; with 1TB of data storage, users can comfortably store vast amounts of data, including multimedia files, documents, and applications.

The MK1016GAP employs advanced technology to enhance its functionality. Notably, it uses a SATA interface, specifically SATA 3.0 (also known as SATA II), which allows for faster data transfer rates compared to older interfaces. The speed enables optimal performance during data-intensive tasks, reducing wait times when accessing or saving large files.

In terms of performance, the MK1016GAP operates at 5400 RPM, which is a common rotational speed for mobile drives. While it may not match the superior speeds of higher RPM drives, 5400 RPM strikes a healthy balance between power consumption and performance, making it suitable for typical laptop workloads. Additionally, the drive features a 8MB cache, which helps improve data retrieval times.

Toshiba employs several technologies in the MK1016GAP to enhance durability and longevity. The drive is designed to withstand the rigors of everyday use, with features that help protect against shocks and vibrations, a critical aspect for mobile devices. Also, the drive incorporates power management features, ensuring efficient energy use, which is essential for preserving battery life in portable applications.

Moreover, the MK1016GAP supports advanced security features, including S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology), allowing users to monitor the health of the drive proactively. This can help in anticipating potential failures and data loss.

In conclusion, the Toshiba MK1016GAP is a versatile and robust hard disk drive that meets the needs of mobile computing with its compact design, substantial storage capacity, and efficient performance. Its advanced technologies and design integrity ensure that it remains a relevant choice for users seeking reliable and effective storage solutions in their laptops and portable devices.
Top Page Image Contents